REMOVAL OF BLUE CORALS "TOUCHLESS"
March 5, 1997

The problem begins with the vehicle it self, usually these products are applied to cars that the paint is in poor condition to begin with so when you remove the "touchless" you’re faced with a paint job that is sometimes beyond repair.

1. First the car should be at room temperature. Using ValuGard’s product "A" mixed 30 oz. per gallon of cool water, wash the painted surfaces and allow the product to dwell approximately - 10 minutes, keep applying the solutions whole agitating, DO NOT ALLOW TO DRY AND DO NOT USE IN DIRECT SUN LIGHT!
2. Thoroughly rinse with cool water and inspect for complete removal. IF NECESSARY REPEAT STEP 1.
3. Dry vehicle
4. Wipe down affected areas with ValuGard’s NEW CAR PREP - product "N" then wipe with clean dry soft cloth.
5. If necessary polish vehicle with ValuGard’s OEM ONE STEP - product "O" and lamb’s wool polishing pad and detail.

This should remove the product and any residue that may remain.

GOOD LUCK!!!!

Questions - Please call our Tech Hot Line 800-543-7156

Tim Brune

Technical Director