RUBBER PROTECTOR

Rubber Protector is not a shiny tire dressing; it is a water based product that is best when applied by sponge not sprayed on.

All tires are not created equally, different tires will accept tire dressings differently, used tires will differ from new tires, also tires that have been "curbed", driven with low air pressure, dressed with solvent based dressings or just plain worn out will require more than 1 application.

The best method for applying Rubber Protector is on a clean, dry tire, pour product into a tire sponge, V.G. part # VG-SG, wipe on all 4 tires and allow to "soak-in" for 3-5 minutes then re-wipe with same sponge. During final detail each tire should be wiped with a dry towel to "set" the resins. If you desire a shinier tire apply several coats of product 5 minutes apart.